Reflective Iron On Letters3" highThe letters are reflective, Iron On MaterialThe silver/gray color is Certified EN471, Class II for safety applications. The font is Arial Black.7 (2.5" high) letters/characters/numbers will fit in a 12 inch long space, like on the back of a shirt. Can be applied to Cotton, acrylic, polyester and similar fibers. Application Directions: Heat at 300 - 360 degrees for 15 - 20 seconds, medium pressure. Peel cold. Wash Instructions: Temperatures up to 180F degrees inside out.
The iron on letters above were ironed on a sweatshirt.The letters in "SMITHEL" are 2.5" high.
The picture above was taken with a flash camera. The above iron on is silver/gray and the below iron on is the yellow and the red/orange in the daylight and with a flash camera. The picture below is the white iron on without the flash.
The iron on below is the white with the flash.
On a polyester safety vest.
Above is black without a flash camera and below is black with a flash camera.
3.0" high letters/numbers/characters cost $3.35 per letter. USPS Domestic 1st Class Shipping costs are included in the above priceMake selection using the drop down windows below and put the Letters/numbers/characters in the monogram window exactly how you would like it.(if monogram is all Capital letters or lower case letters, that is what will be cut and sent)